-
-
Bright Dyes® Powder products come in multiple sizes, including: 1 pound jars, 10 pound pails and 25 pound pails. Bulk sizes are also available. Please contact us for a quote.
Product Details ID: 105005 Name: FLT Blue - Powder Fluorescent: No NSF Certified: Yes Safety Data Sheet: FLT-Blue-Powder.pdf Technical Data Sheet: TD-FLT-Blue.pdf Strong Visual (1 ppm): 120,000 Gallons -
-
Product Details ID: 104041 Name: Fluorescent FLT Yellow/Green Donuts - Wax Fluorescent: Yes NSF Certified: Yes Safety Data Sheet: FLT-YG-Cones_Cakes_Donuts.pdf Technical Data Sheet: TD-Yellow-Green-Wax.pdf Strong Visual (1 ppm): 7,400 Gallons -
-
-
Bright Dyes® Powder products come in multiple sizes, including: 1-pound jars, 10-pound pails and 25-pound pails. Bulk sizes are also available - contact us for a quote.
Product Details ID: 105002 Name: Standard Blue - Powder Fluorescent: No NSF Certified: Yes Safety Data Sheet: Standard-Blue-Powder.pdf Technical Data Sheet: TD-Std-Blue.pdf Strong Visual (1 ppm): 120,000 Gallons -
-
Out of stock
This powerful 385 nm black light utilizes (14) 5mm UV LED bulbs, allowing it to fluoresce at distances over 20 feet in darkness. Toggle on/off switch for continuous use. Requires three 1.5 volt AAA batteries (not included). -
Out of stock
- Produces Continuous Dense Smoke
- Powerful, hardworking engine
- Versatile – Lightweight – Compact
- Portable – Hand-Carryable – One Person Operable
- Self-Contained
- Smoke Cartridges May be Replaced in Seconds
- Smoke Cartridges Create Safe, Clean, Non-Irritating Smoke
- Download Data Sheet
-
Use black Mat dye kits to dye any of the following:- Car mats
- Entrance matting
- Heavy-duty indoor and outdoor mats
- Industrial office mats
- And more
-
Metal Finishes PLUS' clear acrylic sealers' are tough, semi-gloss or matte sealer design to prevent oxygen and moisture from coming into contact with the surface of finished parts. The use of either of our acrylic sealers' helps to protect, maintain and preserve the looks and colors produced with our other finishes. This sealer sprays on smooth and dries quickly to facilitate application of multiple, thin coats. Formulated with 23% solids, our acrylic sealers' contains UV protection and are suitable for use indoors or outdoors. Our sealers may be applied on metal, wood, ceramic, tile, nearly any surface. -
-
-
-
Out of stock
12 LED mini hand held UV light emits long waves at approximately 395nm. Is lightweight and small enough to fit into a pocket. A nylon strap is attached for easy handling. Operates on 3-AAA batteries (Not Included) -
Copper Rust instantly begins the rusting process on most types of steel. A multitude of ornamental rust effects can be produced in a relatively short time span, ranging from several minutes to a few hours. The actual difference between the Rust Oxidizers is pretty subtle. Contact time, humidity, alloy temperature etc. determine the final color and texture. This unique formula combines a foundation of copper with the look of rusted steel. With these safe, easy to use formulas, scores of ornamental rust finishes can be created. Simply alter the humidity, temperature or rusting time and alter the final finish. With Copper Rust, ornamentally rusting ferrous metals has never been so fast, easy, and safe. -
Rust Arrest is a neutralizing agent designed to stop the chemical reactions that take place when applying any of our steel finishes or patina solutions onto metal. Rust Arrest aids in preventing white salt leaching, pealing, rust bleed through, and other problems that may periodically occur when using our steel finishing products. Rust Arrest is a quick and easy to use tool for your metal finishing tool box. -
Contains 60 - 4 oz. packets
The Bonneau 420 blast pack series of color packs are engineered to provide direct initial dyeing ot provide vibrant new color to you cotton fabrics. The packets are pre-measured 4 oz water soluble packs that make the dyeing process simpler by eliminating the need to manually measure the powder dye. Our 420 series is available in black, brown, green, navy, orange, red, royal blue, violet, and yellow. -
-
This formula works on steel and steel alloys to form various shades of colors ranging from blue to black. The finish is similar in appearance to the results of a traditional hot bluing process, but is done at room temperature. Beautiful blue/black finishes can be created by anyone, safely at room temperature. Simply spray or immerse parts in the Gun Metal Blue solution and watch the finish begin to darken. The process can be stopped at any time by removing the part and rinsing with water. This allows the user to create many different colors along the blue-black range in a matter of seconds. -
Contains 60 - 8 oz. packets
The Bonneau 405 super strength series of color packs are engineered to provide direct initial dyeing, as well as to maintain and renew the fabrics color. The packets are pre-measured 8oz water soluble packs that make the dyeing process simpler by eliminating the need to manually measure the powder dye. Our 405 series is available in brown, green, navy, orange, red, royal blue, and yellow. -
-
-
-
- 20 gauge 8″ x 4″ steel reducer
- Heavy Duty – 5 foot of clear flexible steel reinforced duct hose
- Adjustable 8″ & 4″ hose clamps
- Download Data Sheet
-
Product Details ID: 102001 Name: Fluorescent FLT Yellow/Green Cake - Wax Fluorescent: Yes NSF Certified: Yes Safety Data Sheet: FLT-YG-Cones_Cakes_Donuts.pdf Technical Data Sheet: TD-Yellow-Green-Wax.pdf Strong Visual (1 ppm): 240 Gallons -
Our solvent line is a line of high strength dyes. These dye are free of any insolubles and possess a wide range of uses including most solvents, oils, fats, waxes, and resins.
-
- 30 inch manhole plate, made from 11 gauge steel – laser cut then powder coated for precision and durability. A foam cell bottom gasket is applied to create a leak free seal around manhole and reduce vibration and noise
- Heavy Duty – clear, steel reinforced – 8 inch diameter – 5 foot of flexible duct hose
- Adjustable 8 inch hose clamps
- Download Data Sheet
-
Product Details ID: 103063 Name: Fluorescent FWT Red Cones - Wax Fluorescent: Yes NSF Certified: Yes Safety Data Sheet: FWT-Red-Cones_Cakes_Donuts.pdf Technical Data Sheet: TD-FWT-Red-Wax.pdf Strong Visual (1 ppm): 960 Gallons -
Our Antique Red/Brown solution plates steel and non-stainless steel alloys at room temperature without the need for any special equipment. This unique formula can be applied by immersion, spray or by brush for detailed areas. This darkening solution produces a Reddish/Brown finish. The color of the plated surface may be burnished to lighten the finish before sealing. After plating and/or coloring, finished parts may be quick dried and sealed, or allowed to oxidize. Oxidation will alter the colors and textures, creating an additional palate of finish effects. -
Light Pewter will darken steel, steel alloys, "pot" metal, brass and many other metals to various shades of pewter gray. Light Pewter is primarily used to give metal parts an aged, antique appearance. This product may be used as a spray, but the best method of application is immersion. The longer a part is left in the solution, the darker it will become. Most users opt to quick dry the darkened parts and then burnish them before sealing. This process will brighten the high spots and leave the recesses darkened. The result is a natural looking aged, pewter-like finish. If the darkened part is allowed to air dry and oxidize, differing shades of green rust will form. This can produce interesting and attractive finishes, so experimentation is worthwhile. Light Pewter will also darken parts plated with our Copper Plate solution. Different effects are produced on different types of metal as not all metals will react in the same fashion. -
Our copper plating solution plates steel and non-stainless steel alloys at room temperature without the need for any special equipment. This unique formula can be applied by immersion, spray or by brush for detailed areas. The two mil thick plating produces a bright, shiny copper finish similar to the appearance of a new penny straight from the mint! The color of the plated surface may be further altered by using our Rainbow Torch or Pewters. After plating and/or coloring, finished parts may be quick dried and sealed, or allowed to oxidize. Oxidation will alter the colors and textures, creating an additional palate of finish effects. The end results that may be achieved are limited only by your own imagination and artistic ability. This solution is the basic building block for an unlimited range of beautiful, interesting looks never before available to steel finishers. -
NDT Fluid is formulated to be used as a testing media for non-destructive testing of nodular and cast iron castings. It is also an excellent grinding fluid, as well as, indoor rust protection of steel parts. NDT Fluid does not contain any nitrite or nitrate thus avoiding the possibility of nitrosoamine formation while it is under use or in a drum.
-
Our solvent line is a line of high strength dyes. These dye are free of any insolubles and possess a wide range of uses including most solvents, oils, fats, waxes, and resins.
-
